Description and application

Extra flexible cable with copper braid shield and polyurethane sheath, for highly demanding cable chain installation. For data and signal transmission. With North American certification. Electromagnetic interference (EMI) protection.

Design

  • Overall cable shield
    Tinned copper braid, minimum coverage of 90%
  • Conductor
    Polished copper, extra flexible, Class 6 to IEC/EN60228
  • Insulation
    Thermoplastic elastomer compound TPE
  • Wiring
    Two conductors form a twisted pair with optimum pitch to minimise potential external interference that can disrupt the signal. Pairs wired together concentrically.
  • Identification
    By colours according to DIN 47100 (see table in technical annex)
  • Sheath
    Low adhesion TPU (PUR)
  • Colour
    Grey

Technical characteristics

  • Service temperature in fixed and protected installation
    -50 °C to +80 °C
  • Service voltage
    300/500 V
  • Service temperature in flexible installation
    -40 °C to +80 °C
  • Service temperature in mobile installation
    -40 °C to +70 °C
  • Temperature during handling, transport and storage
    +5 °C to +50 °C
  • Test voltage
    2.000 V AC
  • Minimum bend radius in fixed installation
    5 x outer diameter
  • Minimum bend radius in flexible installation
    5 x outer diameter
  • Minimum bend radius for mobile installation (free movement)
    6 x outer diameter
  • Minimum bend radius for installation in cable chain. Movement <10 m (Ambient temperature
    +10 °C to +60 °C)
  • Minimum bend radius for installation in cable chain. Movement >10 m (Ambient temperature
    +10 °C to +60 °C)
  • Max. movement speed
    300m/min.
  • Max. acceleration / deceleration
    40m/s²
  • Max. horizontal movement distance
    100m
  • Number of cycles (Ambient temperature
    +10 °C to +50 °C)

Other properties

  • Standards of reference
    AWM UL 758
  • Certification
    UL, CSA, Style 21576 80°, FT2
  • Water resistance
    AD7 Partial immersion (possibility of total or partial coverage by water partially and intermittently.)
  • Impact resistance
    AG2 Medium (industrial use)
  • Oil resistance
    UL 758 15.1, EN 50363-10-2, VDE 282 Part 10
  • UV resistance
    Good (possibility of sheath discolouration over long time)
  • Chemical resistance in general
    Please refer to technical appendix
  • RoHS
    Free of harmful substances according to RoHS II - Directive 2011/65/EU and Delegated Directive (EU) 2015/863 amending Annex II of Directive 2011/65/EU
  • Paint-wetting impairment substances (PWIS)
    The materials used are free of silicone, cadmium and free of substances that prevent paint from gripping on surfaces

Fire resistant properties

  • Halogen-free
    EN 60754-1, IEC 60754-1, VDE 0482-754-1
  • Flame retardant
    UL FT-2

Installation recommendations for cable chain cables available in technical annex. Sumcab Specialcable Group S.L. (Sumcab) reserves the right to make changes to the product described in this specification without prior notice. While Sumcab makes every reasonable effort to ensure the accuracy of the data at the time of this publication, the information and specifications described in this document are subject to errors or omissions.Sumcab assumes no responsibility that may arise from the use of this specification. Drawings are not to scale unless otherwise specified and are provided for general and informational purposes only. All values represented in this specification should be used only as a guide.

Do you need some help?

Get in touch and we will get back to you as quickly as possible. 

 

+34 93 381 78 76